Phillips & Temro 2021 Product & Application Guide

Used on applications which require maximum heat transfer in a concentrated area. Install multiple fluid heaters for extreme cold weather applications. FEATURES • Diesel, BioDiesel up to 5%, Hydraulic, Oil & Water Compatible • Heats the fuel or fluid inside the tank • 304 Stainless Steel Loop • 2/3/4" (70mm) Above Tank Clearance Required TYPE OF HEATING • Warm Coolant OPTIONS AVAILBLE • Flat or Curved Tank Mounting Flange • Fuel Standpipe • Custom Built Fluid Heaters – Quoted by Request Under 14" or Over 29" L (356mm / 737mm L) THE ORIGINAL ARCTIC FOX IN-TANK FUEL & FLUID WARMERS

®

Fuel Standpipe

No Fuel Standpipe

Part No.

Tank Depth

Coolant Hose

Fuel Standpipe

C-201

Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Flat 14 " through 29 " (356mm through 737mm) Flat 14 " through 29 " (356mm through 737mm) Flat 14 " through 29 " (356mm through 737mm) Flat 14 " through 29 " (356mm through 737mm)

5/8 " Hose Barb

No No

C-201P

1/2 " Female Pipe Thread

C-251

5/8 " Hose Barb

Yes Yes

C-251P CS-201 CS-201P CS-251 CS-251P

1/2 " Female Pipe Thread

5/8 " Hose Barb

No No

1/2 " Female Pipe Thread

5/8 " Hose Barb

Yes Yes

1/2 " Female Pipe Thread

F-203

5/8 " Hose Barb

No No

F-203P

1/2 " Female Pipe Thread

F-253

5/8 " Hose Barb

Yes Yes

F-253P

1/2 " Female Pipe Thread

Note: Coolant loop and standpipe are cut to desired length

PRODUCT DIMENSIONS

phillipsandtemro.com

150