PTI_Product_Catalog

DIESEL STARTING SYSTEMS

®

DIESEL STARTING FLUID SYSTEMS • Measured/metered shot system limits the amount of starting fluid that can enter an engine—provides for optimum starting with less chance of waste or engine damage

®

• High pressure replacement cylinders meet D.O.T. standards • Available in 12 and 24 volt electrical and

mechanically operated models • Uses standard 1 inch cylinders

This measured/metered shot system limits the amount of starting fluid that can enter an engine and provides for optimum starting with less chance of waste or engine damage. • Starting Fluid • Diesel Starting Fluid Kits • Starting Fluid System – Atomizers • Thermostats

• Convenient, one person operation • Economical – about 16# per start

Note: Diesel Starting Fluid Systems are NOT for use with engines equipped with glow plug or flame thrower systems, or engines equipped with intake air heater.

KIT DESCRIPTIONS Application specific part numbers are listed on the following page.

E-Z Stock, E-Z Mount Electrical Kit (12 Volt) Part No. 8203237

One part number covers most class 7 and 8 vehicles. Kit includes: 3 atomizers (8202966, 8202974, 8202982), switch, valve fitting, 48" nylon tube, dash decal, 16 gauge wire, valve and mounting brackets & surface-mount thermostat. Starting fluid cylinder NOT included. E-Z Mount Electrical Kit (12/24 Volt) Replace existing systems, or custom design your own. Kit includes: valve and mounting bracket mounting bracket, switch, valve fitting, dash decal, 48" nylon tubing. Atomizer not included.

DIESEL STARTING FLUID

• All ZeroStart Diesel Starting Fluid kits require cylinder #8200327. Gaskets are not included with cylinders. • Order in case quantities only, 12 cylinders per case • Starting fluid cylinders are NOT returnable . • Safety Data Sheets (SDS) are available on our website at phillipsandtemro.com.

Standard Electrical Kit (12/24 Volt) Direct replacement for some factory installed systems. Kit includes: Valve, switch, cylinder clamp, valve fitting, dash decal, 48" nylon tubing. Atomizer not included.

8200327 8201277

Mechanical Kit A simple, economical way to add ether injection. Kit includes: Valve, cylinder clamp, 84" control cable, valve fitting, dash decal, 48" nylon tubing. Atomizer not included.

D.O.T. Approved Replacement Starting Fluid Cylinders

Part No. 8200327 8201277 8203903

Description

Size

Nozzle 1" – 20 1" – 20

18 oz. 1" neck (Used with most kits) 21 oz. 1" neck (Fits KBI Dieselmatic kits) 1" standard gaskets (cork gasket flat)

3" x 11" 4" x 8"

Pkg. of 50

Aerosol Starting Fluid Valve (12 Volt) Part No. 5801001 Controlled flow valve designed to replace the continuous flow valve used on most agricultural equipment. Uses standard 7.5 – 8.5 oz. spray can (not included). Leak-proof seal and easy one-hand installation of starting fluid can simplify use. Kit includes ether valve and elbow connection.

phillipsandtemro.com

phillipsandtemro.com

160

161

Made with FlippingBook Digital Proposal Maker