PTI_Product_Catalog

SERIES Y-CORD DUAL INDICATOR LIGHT CONNECTIONS Two Cords wired in series allowing the thermostat to cycle the engine block heater on & off. FEATURES • Component of Thermostat Immersion Heater System • Use in conjunction with engine block heater and thermostat to control heater usage • Color coded dual indicator light connections HEAVY DUTY CORDSETS

HEAVY DUTY CORDSETS ACCESSORIES

®

®

WP RUBBER BOOT Part No. 8605645

WP MALE PLUG Part No. 8605254

PLUG PROTECTOR Part No. 3600012

Fits 120V plugs. Prevents freeze ups. Keeps plug contacts clean for optimum power and safety,

120V 15A Plug. Use with any WP housing

Fits 120V 15A WP Plug. Use with WP plug and housing. Not CSA Approved.

T-Stat Length

Heater Length 8' (2.4m) 9' (2.7m) 6' (1.8m) 7' (2.1m)

Wire

Plug Type

Silicone Connector

Part No.

Volts

Amp

16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15

K

3600072 125 3600090 125 3600079 125 3600102 125 3600091 125 3600097 125

15 15 15 15 15 15

2' (60cm) 4.6' (1.4) 6' (1.8m) 8' (2.4m) 14' (4.3m) 14' (4.3m)

3-WAY CONNECTOR Part No. 3600040

3-WAY CONNECTOR & KIT Receptacle & 3-Way Connector (not CSA) Part No. 3600041

M

K K K K

(3) 120V female receptacles. 14/3 Gauge Wire, 24" (61cm) long. Type A male plug. Not CSA Approved . Use multiple cold weather product with one common cord.

8.3' (2.5m) 14' (4.3m)

Indicator Conn. – Power

WP Male Plug

120V, 5' (1.5m), 14 Gauge. 4-Hole Square. Chrome Plated.

Heater Cord

THERMOSTATS

Silicone connector & threaded cord nut

Maintain coolant temperature and save money by reducing the engine heater operating hours with a coolant thermostat. The thermostat is installed at the farthest point from the block heater to monitor the overall coolant temperature. Based on the temperature setting, the thermostat cycles the engine block heater on & off, reducing the operating hours of the engine block heater.

Indicator Conn. – Heater

Thermostat Cord

Part No. 3600094 Three cords, two wired in series for a thermostat & engine block heater. Thermostat will cycle the block heater saving energy. The third cord is wired parallel for a second independant heater. W-CORD

Features: • Component of Thermostat Immersion Heater System • Use in conjunction with engine block heater and Series Y-Cord to control heater usage • Saves money by reducing engine heater operating hours • New installations or replacement part

FEATURES • 125 Volt, 15 Amps • 16/3 HPN Wire • Plug Type: A (WP) - NEMA 5-15 • Cord Lengths: Heaters 10' (3m) each & Thermostat 11.5' (3.5m)

• Use in conjunction with (2) heaters and (1) thermostat. • Thermostat controls one heater and the remaining heater is always on when voltage applied.

Part No. 3600068 1/2" NPT On 40°F / Off 55°F Part No. 3600058 1/2" NPT On 55°F / Off 75°F Part No. 3600057 1/2" NPT On 100°F / Off 120°F

Part No. 3600066 3/4" NPT On 40°F / Off 55°F

Part No. 3600081 #8 STOR On 40°F / Off 55°F

Part No. 3600087 M27 On 40°F / Off 55°F

Thermostat Cord

Silicone Connector Type M

Heater Cord

WP Male Plug NEMA 5-15

Additional Heater Cord

Silicone Connector Type K

phillipsandtemro.com

phillipsandtemro.com

100

101