2020 Phillips and Temro Catalog

KOMATSU – CONTINUED

S6D-95L & SA6D-95L (298 CID) Part No. Watt Volt

Diameter

Type

Repl. Cord

3100082 600 3100010 600

120 120

40mm Freeze Plug 3600006

30mm Freeze Plug 3600005 Installation Information: 3100082: Install in Left Rear (LR). Point element UP. 3100010: Insert at 3 o’clock and rotate to 4 o’clock.

S6D140, SA6D140 (Example: WA500 loader) Part No. Watt 8600880 1500 120 Volt

Diameter

Type

Repl. Cord

1-3/4" THD Immersion 3600008 Installation Information: 2001 and newer use 8600880: Replaces threaded core plug on right side of engine.

S6D170, SA6D170 (Example: WA600 loader) Part No. Watt 8602301 1500 120 Volt

Diameter

Type

Repl. Cord

Plate Immersion 3600008 Installation Information: Install in rectangular water jacket access plate (6-bolt) located on the Right side of engine – rear. Requires removal of engine side plate and hole to be drilled for heater installation.

KUBOTA

B Series (Except 2 cylinder) Part No. Watt 3100093 400

Volt 120

Diameter 3/4" NPT

Type

Repl. Cord

Immersion 3600003 Installation Information: Install in Right Front (RF). Use 1" x 3/4" pipe bushing. L Series Part No. Watt Volt Diameter Type Repl. Cord 3100093 400 120 3/4" NPT Immersion 3600003 Installation Information: Install in Right Front (RF). Use 1" x 3/4" pipe bushing.

M Series (3 & 4 cyl.) Part No. Watt 3100093 400

Volt 120

Diameter 3/4" NPT

Type

Repl. Cord

Immersion 3600003

Installation Information: Install in front.

D600, D640, WG600, D662, D722*, DG750, DF750, WG750 (Super Mini/New Super Mini 3 cyl.) Part No. Watt Volt Diameter Type

Repl. Cord

3100099 400 120

30mm Freeze Plug 3600004

Installation Information: Install in back of head. * Kubota D722: use 3100099 on Tier 2 or older; use 3100132 on newer D722 (needs a pound in heater due to change in valve cover).

phillipsandtemro.com

75

Made with FlippingBook Annual report