2023 Phillips and Temro Product & Application Guide

FOOTNOTES

Footnote # Application Information 1

Remove and replace starter Pull or pry out core plug

2

3 Replacement heater only. May require lower coolant return line (steel tube purchase from GM) 4 Remove and replace alternator 5 Installation by certified mechanic recommended 6 On some models, the air pump has to be loosened 7 Remove right front wheel and splash guard 8 Lower Radiator Hose Heater: 1970 & Prior 1-3/4", 1971 & Later 1-1/2" 9 Lower Radiator Hose Heater: 1970 & Prior 1-3/4", 1971-1993 1-1/2" 10 Install in hose rise closest to water pump 11 Lower Radiator Hose Heater: 1977-1982 1-1/4", 1983-1985 1-1/2" 12 Lower Radiator Hose Heater: 1993 & prior 13 If LR is a 40mm core hole, install heater in 2NDLR 14 Core Hole Type: 1985-1991 Stepped, 1991-1996 Standard (Confirm with dealer) 15 Kit contains a thermostatically controlled cord required for compatibility with the OBD 11 system in these vehicles 16 May Require: Mounting Elbow 14075-AM700, Gasket 11065-AM700, and Bolts A1005H8 (Available from Nissan Infinity) 17 Heater location is behind the exhaust manifold

phillipsandtemro.com

36

Made with FlippingBook Ebook Creator