2023_PTI_Catalog_10-13-23

First page Table of contents Previous page 64 Next page Last page

JOHN DEERE

50, 60, 70, 730 Series A, B, D, G Part No. Watt Volt

Diameter 3/4" NPT

Type

Repl. Cord

3100093 400 Immersion 3600003 Installation Information: Install in bottom of water jacket. Circulation heater is acceptable alternative. 120

1020, 2020, 3010, 3020, 4000, 4010, 4020 Part No. Watt Volt Diameter

Type LRHH

Repl. Cord

3200004 600 3600047 Installation Information: Lower radiator hose heater. Circulation heater is acceptable alternative. 2010 Part No. Watt Volt Diameter Type Repl. Cord 3200003 600 120 1-1/2" LRHH 3600047 Installation Information: Lower radiator hose heater. Circulation heater is acceptable alternative. 3029 Part No. Watt Volt Diameter Type Repl. Cord 3100093 400 120 3/4" NPT Immersion 3600003 Installation Information: Replaces 3/4" pipe plug on rear face of engine. 120 1-3/4"

4230, 4430, 4440, 4630, 6030, 7020, 7520 (Tractors manufactured prior to 1976 without large hex plug) Part No. Watt Volt Diameter Type

Repl. Cord

8602050 1000 120

2"

Freeze Plug 3600024

Installation Information: Install in Left Side (LS). Point element UP. Circulation heater is acceptable alternative.

6105, 6125 Part No.

Watt

Volt

Diameter 1" NPT

Type

Repl. Cord

3500013 1500 120

Immersion 3600008

Installation Information: Installs in oil cooler housing. 6404, 6466, 6619 (Engines featuring smooth bore core hole – engines manufactured prior to 1976) Part No. Watt Volt Diameter Type Repl. Cord 8602050 1000 120 2" Freeze Plug 3600024 Installation Information: Replace 2" diameter core hole on Left side of engine. Power Tech: 4045, 6068 Part No. Watt Volt Diameter Type Repl. Cord 3500020 1000 120 1-5/8" THUD Immersion 3600008 Installation Information: Replace 1-5/8" threaded plug on Right side of engine. Series 250 PowerTech: 4024 PowerTech (2.4L, 4 Cyl.) & 5030 PowerTech (3.0L, 5 Cyl.) Part No. Watt Volt Diameter Type Repl. Cord 3500089 600 120 1.25" Freeze Plug N/A Installation Information: Replace 1.25" diameter core hole on Left side of engine, near the starter.

phillipsandtemro.com

64

Made with FlippingBook Learn more on our blog