2023_PTI_Catalog_10-13-23

DIESEL STARTING FLUID SYSTEMS STARTING FLUID SYSTEM ATOMIZERS • Designed for most engines with 1/8" or 1/4" NPT opening • Provides proper direction and atomization of pressurized fluid

®

Atomizer (see below) (1/8" x 1-1/4")

1/4" Bushing

Dual Atomizer Kit (for use with “V’ engines)

• Sintered bronze filter maintains purity of intake air • Spray pattern clearly marked for easy installation

ATOMIZER APPLICATIONS Part No. Orifice/Size Applications

Location

Spray Pattern

8202931 .011 8202966*

Cummins B & C Series

Pre-tapped manifold

Cummins Non-Turbo & other manifolds over 2" Detroit Diesel blower box

Center intake manifold

.018 Blue

Center blower box

8202990

Mack in-line 6

Pre-tapped hole between

.018

cylinders #5 & #6

8203016 .013 Under 500 CID 8202974* Yellow 8200003 .013

Mack Midliner

Air intake pipe or intake manifold

Ford 6.6/7.8L, Cummins & Perkins in-line, all Turbocharged engines

Cummins 600 Swivel Style Cummins 600 Swivel Style

Direct either flow against flow of incoming air

.018

8200004

.013

Over 450 CID

(Pressure side of turbo), DDA or IH Air Intake Horn

8202982*

.018 Red

*Included in kit 8203237 Note: All atomizers 1/8" NPT.

• Locks out electrical valve operation at specified engine temperatures • Surface mount installs without draining engine coolant • Threaded 1/2" NPT installs directly in any 1/2" NPT opening in water jacket DIESEL STARTING FLUID SYSTEM THERMOSTATS

Threaded Style

Surface Mount

Part No. 8200386 8202281 8291837

Type

Temp ON

Temp OFF 85°F (29°C) 65°F (18°C) 100°F (38°C)

Surface Mount

60°F (16°C) 45°F (7°C) 70°F (21°C)

Threaded Threaded

phillipsandtemro.com

164