2023_PTI_Catalog_10-13-23

THE ORIGINAL ARCTIC FOX WITH BY-PASS THERMOSTAT IN-TANK FUEL & FLUID WARMERS

®

Fuel is warmed to the optimum operating temperature in cold weather with the proven Arctic Fox® fuel heater in-tank design. A fully mechanical thermostat integrated into the unit by-passes the fuel warming loop when fuel temperature reaches optimum operating temperature. FEATURES • Diesel, BioDiesel up to 5%, Hydraulic, Oil & Water Compatible • Heats the fuel or fluid inside the tank • Thermostatically Controlled – Maintains fuel temperature at 80°F (27°C) • 304 Stainless Steel Loop • 2/3/4" (70mm) Above Tank Clearance Required TYPE OF HEATING • Warm Coolant OPTIONS AVAILABLE • Flat or Curved Tank Mounting Flange • Fuel Standpipe • Can be Custom Designed

Part

Tank Depth

Coolant Connection

Fuel Standpipe

C-406-XX C-407-XX C-456-XX C-457-XX CS-406-XX CS-407-XX CS-456-XX CS-457-XX F-406-XX F-407-XX F-456-XX F-457-XX

Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 22 " through 29 " (559mm through 737mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Round 14 " through 21 " (356mm through 533mm) Flat 14 " through 29 " / 356 through 737mm Flat 14 " through 29 " / 356 through 737mm Flat 14 " through 29 " / 356 through 737mm Flat 14 " through 29 " / 356 through 737mm

5/8 " Hose Barb 3/4 " Hose Barb 5/8 " Hose Barb 3/4 " Hose Barb 5/8 " Hose Barb 3/4 " Hose Barb 5/8 " Hose Barb 3/4 " Hose Barb 5/8 " Hose Barb 3/4 " Hose Barb 5/8 " Hose Barb 3/4 " Hose Barb

No No

Yes Yes

No No

Yes Yes

No No

Yes Yes

ORDERING INFORMATION: ALL heaters are factory pre-assembled. Order heaters based on tank depth. Example C-406-XX—if tank depth is 27 " / 686mm, order C-406-27. NOTE: Warranty is void if disassembled

SERVICE PART

phillipsandtemro.com

144

Made with FlippingBook Learn more on our blog