2023_PTI_Catalog_10-13-23

WARNING: Failure to use recommended reinforcement kits or providing additional structural support to heater may cause tank to crack, leading to fuel leakage. TANK REINFORCEMENT ADAPTERS Installation: • Extreme Vibration • Horizontal Installation • Additional Structural Support HOT FOX TANK ADAPTER KITS IN-TANK FUEL & FLUID WARMERS

®

SPACER KITS Installation: • Raise Heater Flange • Additional Structural Support

KT-875 Purpose: To raise HOT FOX fuel heater flange 1/2" (13mm) above tank. Parts Included: • (5) #10-32 UNF socket head bolts • (1) A-841 Gasket • (1) 1/2" (13mm) Spacer KT-877 Purpose: To raise HOT FOX fuel heater flange 1" (25mm) above tank. For Kenworth recessed gauge opening & misc. others Parts Included: • (5) #10-32 UNF socket head bolts • (1) A-841 Gasket • (1) 1" (25mm) Spacer

THREADED ADAPTER Fits 1-1/2" & 2" NPT Couplings

WELD-IN ADAPTER For flange thickness 1"

A-1721F -90°F (-67°C) Parts Included

A-2060 (Steel) A-2060-A (Alum.) -40° F/C Parts Included (1) A-1792 Gasket (2) A-1726 O-Ring

A-2060F A-2060-AF

-90°F (-67°C) Parts Included

(1) A-1792 Gasket (2) Flouro Silicone O-Ring

(1) A-1792 Gasket (2) A-2758 O-Ring

Installation: • Non-Reinforced Opening • Manufactured Tanks • Additional Structural Support

HOT FOX FUEL & FLUID HEATER ACCESSORIES

FLAT TANKS

ROUND TANKS

BLANK PLATE Part No. A-870 Application: • Cover Standard USA Fuel Tank Opening TAPPED PLATE Part No. A-4607 Application: • Auxiliary Standpipe Installation into a Standard USA Fuel Tank Opening • Center Tap for 1/2" NPT 120MM FLANGE KT-829K Application: • Adapts Kenworth OEM 104.5mm Bolt Circle Flange to Hot Fox mount Kit Components

KT-827C for 22"-29"/559-737mm Dia. KT-831CS for 14"-21"/356-533mm Dia. Applications: Adapts standard Arctic Fox fuel heater mount to Hot Fox mount. Kit Components • Adapter Plate 6"/152mm Square (1) • Backing Plates (2) • Clips (4) • Gasket (1)—A-611 • Mounting Bolts (12) – A-610 • Template (1)—A-708

KT-826F Applications:

Adapts standard Arctic Fox fuel heater mount to Hot Fox mount. Kit Components • Adapter Plate 6"/152mm Square • (1) Flat Adapter Plate • Backing Plates (2) • Clips (4) • Gasket (1)—A-611 • Mounting Bolts (12) – A-610 • • Template (1)—A-708

• (1) Adapter Plate • (1) Gasket – A-811 • (10) Mounting Bolts

phillipsandtemro.com

141