2023_PTI_Catalog_10-13-23

Get the fuel warming efficiency you desire and the thermostatic control you need in one factory assembled product that is installed in the fuel tank. FEATURES • Diesel & BioDiesel Compatible HOT FOX WITH SHUT-OFF THERMOSTAT IN-TANK FUEL & FLUID WARMERS

®

• Heats fuel as it is drawn from the tank to the engine with the remaining heat dispersed inside the tank. • Shut-Off Thermostat On 78°F (25°C) Off 95°F (35°C)

• 304 Stainless Steel Construction • 1/2" NPT Extension Fitting Included

• Installs in a Standard SAE Fuel Sending Gauge Opening • Fuel Tank Adapter Kit Required for Non SAE Openings (Page 153) TYPE OF HEATING • Warm Coolant

Part No.

Tube Length 9" / 229 mm

Tank Depth

Coolant Port

Fuel Port 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT

SHFT-2512-10-12 SHFT-2512-13-15 SHFT-2512-14-16 SHFT-2512-17-19 SHFT-2512-20-22 SHFT-2512-22-24 SHFT-2512-24-26 SHFT-2512-26-28 SHFT-2512-27-29

10-12" / 254-305 mm

1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT

12" / 305 mm 13-15" / 330-381 mm 13" / 330 mm 14-16" / 356-406 mm 16" / 406 mm 17-19" / 432-483 mm 19" / 483 mm 20-22" / 508-559 mm 21" / 533 mm 22-24" / 559-610 mm 23" / 584 mm 24-26" / 610-660 mm 25" / 635 mm 26-28" / 610-711 mm 26" / 660 mm 27-29" / 686-737 mm

CAUTION: THE HOT FOX WITH SHUT-OFF THERMOSTAT REQUIRES IT’S OWN COOLANT LOOP—DO NOT PLUMB IN SERIES WITH ANY OTHER COOLANT DEPENDENT DEVICES WARNING: Tank reinforcement MUST be used to provide additional structural support to the fluid warmer to avoid tank cracking, leading to fluid leakage. See Page 153 for tank adapter kits.

phillipsandtemro.com

135