2023_PTI_Catalog_10-13-23

SERIES Y-CORD DUAL INDICATOR LIGHT CONNECTIONS Two Cords wired in series allowing the thermostat to cycle the engine block heater on & off. FEATURES • Component of Thermostat Immersion Heater System • Use in conjunction with engine block heater and thermostat to control heater usage • Color coded dual indicator light connections HEAVY DUTY CORDSETS

®

T-Stat Length

Heater Length 8' (2.4m) 9' (2.7m) 6' (1.8m) 7' (2.1m)

Wire

Plug Type

Silicone Connector

Part No.

Volts

Amp

16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15 16/3 HPN A (WP) - NEMA 5-15

K

3600072 125 3600090 125 3600079 125 3600102 125 3600091 125 3600097 125

15 15 15 15 15 15

2' (60cm) 4.6' (1.4) 6' (1.8m) 8' (2.4m) 14' (4.3m) 14' (4.3m)

M

K K K K

8.3' (2.5m) 14' (4.3m)

Indicator Conn. – Power

WP Male Plug

Heater Cord

Silicone connector & threaded cord nut

Indicator Conn. – Heater

Thermostat Cord

Part No. 3600094 Three cords, two wired in series for a thermostat & engine block heater. Thermostat will cycle the block heater saving energy. The third cord is wired parallel for a second independant heater. W-CORD

FEATURES • 125 Volt, 15 Amps • 16/3 HPN Wire • Plug Type: A (WP) - NEMA 5-15 • Cord Lengths: Heaters 10' (3m) each & Thermostat 11.5' (3.5m)

• Use in conjunction with (2) heaters and (1) thermostat. • Thermostat controls one heater and the remaining heater is always on when voltage applied.

Thermostat Cord

Silicone Connector Type M

Heater Cord

WP Male Plug NEMA 5-15

Additional Heater Cord

Silicone Connector Type K

phillipsandtemro.com

102