2022 Phillips and Temro Product & Application Guide

SINGLE & DUAL DRAW STANDPIPES IN-TANK FUEL & FLUID WARMERS The Fuel Standpipe transfers diesel fuel from the fuel tank to the diesel-fired heater. • Single Draw – Can serve as either a suction standpipe or as a return fuel provision • Dual Draw – Includes a suction standpipe and a return fuel provision

®

DUAL DRAW STANDPIPE When ordering specify in part number if C-curved tank or F-flat tank and then tank depth Example: SP-1662-F-13

SINGLE DRAW STANDPIPE KIT Part number SP-1069 • Non-heated standpipe • Fits tanks up to 29” (737mm), cut to required length by installer • Bolts to standard SAE fuel gauge sending unit • Kit includes template and hardware to easily make additional tank opening when required • Custom brackets available, contact customerservice@philliipsandtemro.com for quote

Part Number

Measured Outside Tank Dimension 13" 13-7/8" (330mm–353mm) 14" 14-7/8" (356mm–379mm) 15" 15-7/8" (381mm–404mm) 16" 16-7/8" (406mm–429mm) 17" 17-7/8" (432mm–455mm) 18" 18-7/8" (457mm–480mm) 19" 19-7/8" (483mm–506mm) 20" 20-7/8" (508mm–531mm) 21" 21-7/8" (533mm–556mm) 22" 22-7/8" (559mm–582mm) 23" 23-7/8" (584mm–607mm) 24" 24-7/8" (610mm–633mm) 25" 25-7/8" (635mm–658mm) 26" 26-7/8" (660mm–683mm) 27" 27-7/8" (686mm–709mm) 28" 28-7/8" (711mm–734mm) 29" 29-7/8" (737mm–760mm) 30" 30-7/8" (762mm–785mm)

SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662 SP-1662

SINGLE DRAW STANDPIPE SERVICE PARTS

Item Qty. Description

Part # A-857 A-861

1 2 3 4 5 6 7 8 9

5 #10-32 Allen head cap screw

5 St. Steel Washer

1 5/8" / 16mm x 1/2" NPT Elbow A-609

2 Self-Drill-Tap Screw 1 Standpipe Fitting

A-608

A-622B

1 Copper Washer

A-816

1 2.75" / 70mm O.D Standpipe Plate A-1364

1 Gasket

A-841 A-834 A-635

1 Backup Plate/Template

10 1 Inverted Flare Gasket 11 1 Standpipe 29"/737mm

A-624-29

phillipsandtemro.com

160

Made with FlippingBook Ebook Creator