2022 Phillips and Temro Product & Application Guide

THE ORIGINAL ARCTIC FOX CUSTOM DESIGNED IN-TANK FUEL & FLUID WARMERS

®

CUSTOM HEAT EXCHANGERS 1. Provide the following information to receive a quote a. Exact dimensions and tank clearance (I.e. sketch, blueprint, IGES CAD file? Tank and system capacity) b. Type of vehicle or machine c. Type of fluid to be heated d. Maximum allowable temperature of fluid to be heated. Is thermostat required? e. Total coolant capacity f. Does equipment have a fuel fired coolant pre-heater? What is the BTU size capacity? g. Does the application only require maintaining existing reservoir heat or will system be ”cold soaked” and fluid temperature rise be required? Please note original fluid temperature and desired temperature after one hour of heating.

Example of Custom Heater with By-Pass Thermostat for Customer Specified Tank Configuration

h. Is tank pressurized or used on aerial man lift? 2. Fax or call Arctic Fox with above information Phone: (800) 654-5382 or (763) 972-2758 Fax: (763) 972-2873.

3. Arctic Fox will design and quote for this specific reservoir. 4. A design print and customer authorization will be sent to customer. If approved, customer will indicate so by returning signed customer authorization form to Arctic Fox. After receipt of signed authorization, orders for the custom heat exchanger will be filled. Allow 4 to 6 weeks after receipt of signed authorization.

FUEL & HYDRAULIC TANK WELD-ON ADAPTERS

Part No. Material A-626 Steel

Cover Plate Gasket Mounting Bolt

A-414-0 A-611

A-610 A-610

A-800 Aluminum A-802 A-801

phillipsandtemro.com

157