2022 Phillips and Temro Product & Application Guide

Used on applications which require maximum heat transfer in a concentrated area. Install multiple fluid heaters for extreme cold weather applications. Hydraulic fluid circulates from the standpipe through the vent hole. Fluid will not circulate if levels fall below the vent opening. HOT FOX FOR HYDRAULIC FLUID IN-TANK FUEL & FLUID WARMERS

®

Coolant Port

Coolant Port

FEATURES • Diesel & Hydraulic Fluid Compatible • Heats and circulates the fuel or fluid inside the tank • 304 Stainless Steel Construction • Installs in a Standard SAE Fuel Sending Gauge Opening • Fuel Tank Adapter Kit Required for Non SAE Openings (Page 153)

TYPE OF HEATING • Warm Coolant

Minimum Fluid Depth

Fluid Outlet Port

Tube Length

Fluid Outlet Port

Maximum Tank Capacity (usg/L)

Part Number

Tube Length

Fluid Outlet Port 3.75" (9.5 cm) 5.75" (14.6 cm) 6.75" (17 cm) 7.75" (19.7 cm) 10.75" (27 cm) 13.68" (35 cm) 15.18" (38.6 cm) 16.68" (42 cm) 18.18" (46 cm) 18.93" (48 cm)

Fluid Inlet Port

SHH-1844-09 8-1/4" (210 mm) SHH-1844-11 10-1/4" (260 mm) SHH-1844-12 11-1/4" (286 mm) SHH-1844-13 12-1/4" (311 mm) SHH-1844-16 15-1/4" (387 mm) SHH-1844-19 18-1/4" (464 mm) SHH-1844-21 20-1/4" (514 mm) SHH-1844-23 22-1/4" (565 mm) SHH-1844-25 24-1/4" (616 mm) SHH-1844-26 25-1/4" (641 mm)

8g / 30L 10g / 38L 12g / 45L 14g / 53L 17g / 64L 20g / 76L 22g / 83L 25g / 95L 28g / 106L 32g / 121L

WARNING: Tank reinforcement MUST be used to provide additional structural support to the fluid warmer to avoid tank cracking, leading to fluid leakage. See Page 153 for tank adapter kits.

HOT FOX SERVICE PARTS

Item Qty

Description

Part # A-857 A-861 A-608 A-841 A-834 A-858

1 2 3 4 5 6 7 8

5 5 2 1 1 1

#10-32 UNF x 1.0 Cap Screw

Stainless Steel Washer Self Drill / Tap Screw

HOT FOX™ Fuel Warmer Gasket

Back Up Plate / Template

1/2" NPT X 2.0 (51mm) Extension Nipple

HOT FOX™ Fuel heater Extension Nipple—1/2" NPT X 21" (533mm) Long

SP-1950 KT-834

HOT FOX™ Fuel heater Hardware Kit (Includes items 1-6)

Does NOT fit Industrial HOTFOX models

phillipsandtemro.com

152