2018 Zerostart Temro Catalog

CIRCULATION HEATERS

Circulates warm coolant throughout the engine to provide even heat distribution. FORCED FLOW

Application(s) • Diesel or Natural Gaseous Genset

Features • Nonmagnetic impeller • Die cast aluminum housing • Corrosion resistant steel brackets • Thermostatically controlled and protected 1500W – On 60°F (15.6°C) / Off 125°F (51.7°C) 2700W – On 90°F (32.2°C) / Off 115°F (46.1°C) • Safety shut-off provides overheat protection • 6' (1.8m) cord • Assembled service kit available includes element, thermostat, wire harness, cover and o-ring

Part No. 3309020, 3309021

Vibration Isolator

Part No. 3309024, 3309025

Outlet Location Watts Volts Amps

Heater Hose Connections 5/8" (16mm) 5/8" (16mm) 5/8" (16mm) 5/8" (16mm)

Service Kit

Plug Type

Part No.

Length

Width

Height

3309020 Right 3309021 Left 3309024 Right 3309025 Left

1500 120 12.5 8-1/2" (22cm) 1500 120 12.5 8-1/2"(22cm) 2700 240 11.25 8-1/2" (22cm) 2700 240 11.25 8-1/2" (22cm)

4-13/16" (12.2cm) 4-13/16" (12.2cm) 4-13/16" (12.2cm) 4-13/16" (12.2cm)

10' (25.4cm) 10' (25.4cm) 10' (25.4cm) 10' (25.4cm)

3309026 3309027 3309028 3309029

C C B B

See page 122 for plug type configuration

HIGH CAPACITY Applications: • Industrial • Big Bore Engines (14L+) Features:

• Low Watt-Density heating elements for long life • Thermally isolated regulating thermostat available • Overheat thermostat 205°F (96°C) to 165°F (74°C) • NRTL/C approval (complies with UL/CSA) • Four-bolt flange for easy element replacement • 14 gauge SJOW cord (16 in. length – 40.6cm) is abrasion, oil, and grease resistant • Nylon check valve • 1" NPT inlet and outlet / 1/4" NPT drain

Regulating & Overheat Thermostat

Heating & Accessory Products

Overheat Thermostat

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

93

Made with FlippingBook - Online magazine maker