2017 Zerostart Temro Catalog

CUMMINS – CONTINUED

855 CID Engines with full flow cooling, low-mount oil cooler (Connected to Front port, Rear port blocked by exhaust) Part No. Watt Volt Diameter Type Immersion 3600008 Installation Information: Replaces water jacket access plate on side of engine. Available Service Parts: Hex Nut (8602999), Element Gasket (8603650), Plate Gasket (8603359) 855 CID Alternate installation Rear plug location without aftercooler water connection. Recommended as alternate location for cab-over vehicles only Part No. Watt Volt Diameter Type 8608709 1500 120 Plate

Complete exhaust obstruction

Repl. Cord

1.5"

Repl. Cord

3500036 1500 120 1-1/2" NPT Immersion 3600008 Installation Information: Replaces 1-1/2" pipe plug on Rear face of engine, right side (above flywheel housing).

855 CID Alternate installation 1996 & newer engines with O-ring seal Part No. Watt Volt

Diameter

Type

Repl. Cord

3500023 1500 120 1-5/8" STOR Immersion 3600008 Installation Information: Replaces 1-5/8" plug on Rear face of engine, right side (above flywheel housing).

Agricultural, Heavy Duty, Off Road & Industrial Applications

855 CID Engines with full flow cooling, high-mount oil cooler Uses hose and two clamps for water tube connection to casting. (Most engines manufactured from August 1975 to June 1982) Part No. Watt Volt Diameter Type

Repl. Cord

8601100 1500 120 Immersion 3600008 Installation Information: Replaces water jacket access plate on side of engine. Available Service Parts: Hex Nut (8602999), Element Gasket (8603650), Plate Gasket (8603359) 855 CID Engines with full flow cooling, high-mount oil cooler-obstruction (Connected to Rear port which is partially blocked by exhaust) Part No. Watt Volt Diameter Type Repl. Cord 8608741 1500 120 Plate Immersion 3600008 Installation Information: Replaces water jacket access plate on side of engine. Available Service Parts: Plate Gasket (8603359) Plate

Partial exhaust obstruction

855 CID Engines with full flow cooling, high-mount oil cooler – O-ring (Uses O-ring for water tube connection. Engines only produced prior to 1975) Use Circulation heater.

855 CID Replacement element for existing 8602379 heater (Does NOT include casting. Cordset is included) Part No. Watt Volt Diameter Type

Repl. Cord

8602301 1500 120

Plate

Immersion 3600008

Installation Information: Replaces heating element in casting. Available Service Parts: Hex Nut (8602999), Plate (8603138), Gasket (8603383) B3.3T (3.3L) , QSB (3.3L) Part No. Watt Volt Diameter Type Repl. Cord 3100046 400 120 40mm Freeze Plug 3600006 Installation Information: Installs in Left Rear (LR).

1-800-328-6108 or 952-941-9700 • phillipsandtemro.com

45